Our Services

Centrifugal Blower / ID Fan

Performant, High Pressure / Flow blowers

Brochure Video

Centrifugal Fans and Blowers typically have one of six types of wheels that draw the air into the inlet of the blower housing, through the wheel, and discharges it at 90 degrees out through the discharge of the housing. The two most common types of Centrifugal Blowers are Pressure Blowers and Volume Blowers.

Pressure Blowers are designed to draw or push air at high pressures, rated in static pressure water gauge (SPWG). Volume Blowers are designed to draw or push larger volumes of air, rated in cubic feet of air per minute (CFM),at lower static pressures than Pressure Blowers. Centrifugal Blowers are typically made of fabricated steel, stainless steel or cast aluminum.

Butterfly Valves

Leakage proof Operation

Used in a wide range of applications, from water treatment plants to oil refineries.

Portable Welding Fume Extractor

High-Performing Welding Fume Extraction

A portable fume extractor which pulls out harmful fume generated in the welding process. This extractor requires very less energy and maintenance.

Pneumatic Conveying System

Safe transporter for bulk materials

A pneumatic conveying system transfers dry bulk materials or powders through an enclosed conveying pipeline using pressure differential and gas flow (usually air), generated by an air movement device such as a fan, roots blower or compressor.

Pneumatic conveying provides a cost-effective way to handle and transfer powdered and bulk granular materials easily with very little loss. It is suitable for a range of process industries such as; Food and Beverage, Pet Food, Chemicals and Detergents, Renewables and Specialist Materials.

Vapour Recovery Unit

A Vapor Recovery Unit (VRU) is a set-up designed to remove unwanted vapors present in crude oil or distillate tanks allowing operators to comply with prevailing emission regulations. VRU systems can be employed in a wide range of chemical industries with several variants available. For example, a vapor recovery system for storage tanks can be used to recover vent gas from crude oil and distillate tanks at storage facilities.

The typical VRU consists of four principal components:

• Gas Compressor
• Scrubber
• Variable Frequency Drives (VFDs)
• Switching device

Downdraft Table

Workplace Safety

Workers safety and hygiene is one of the important criteria in the manufacturing industry. In processes like grinding, buffing and welding the sparks and smoke produced is irritating and harmful to the operator.